longmrclogo.GIF (25976 bytes)


 

Blak-Ray B-100 Series High Intensity Ultraviolet Inspection Lamps

The versatile B-100 Series of high powered ultraviolet (UV) inspection lamps offer brilliant irradiance for optimum fluorescence. With seven lamps to choose from, there is one for your longwave (365nm) inspection needs.

Features: Lamp heads on all models of the B-100 Series lamps are mounted onto pistol-grip handles that balance well in the hand. These ergonomically designed units reduce operator fatigue. The grip handle on all models (except the B-100SP) fits into the transformer base allowing the lamp head to rotate a full 360. The self-ballasted B-l00SP requires no external transformer. The patented Cool-TouchTM lamp housing allows users to handle the lamp head regardless of how long the lamp has been on. These rugged lamp heads are molded from a special heat-resistant plastic. Unlike the wire-cage housings of competitive lamps, these lamp housings are safe - never too hot to touch. This feature comes standard on AP, YP, and SP models. All UVP high powered ultraviolet lamps can be placed face down on a working surface without damage to the filter.

 

 
B-100AP, B-100AP/R
Click for larger picture             
           

B-100AP: Provides 100 watts of high-intensity longwave illumination. This lamp features the Cool-Touch housing. At 18 inches (457 mm) the B-100AP produces a highly intense center of UV irradiance about 5 inches (127 mm) in diameter. The lamp head is connected to the transformer base by an 8 foot cord. CSA listed.

B-100AP/R This model has the same features as the B-100AP plus 20 foot (6.1 meters) primary and secondary cords which provide added mobility.  Two cord holders, extending 2.93 inches (74 mm) on both sides of the ballast, keep cord slack under control.



                         
B-100YP, B-100Y
Click for larger picture 
   

B-100YP: Provides high contrast light for the semiconductor fabrication industry. In addition to the Cool-Touch housing, this lamp features a yellow filter which blocks wavelengths shorter than 500nm and produces three strong mercury lines at 543, 574, and 576nm.  Because most photoresist absorption occurs below 450nm, the B-I 00YP is the perfect choice for semiconductor inspection. The lamp head is connected to the transformer base by an 8 foot (2.44m) cord. CSA listed.

B-100Y:  This product has the same yellow filter and wavelength capability as the B-I00YP. B-100Y is housed in scratch-resistant, powder-painted aluminum. Its lamp head is attached to the transformer base with an 8 foot (2.44 m) cord. UL. listed.

 

 









B-100SP
Click for larger picture


B-100SP High Intensity Lamp
This 160 watt longwave, self-ballasted lamp is our most portable high-powered lamp. The ballast is built directly into the Cool-Touch lamp head. An 8 foot (2.44 m) line cord and UVP Bulb-Protector come standard with this model. An on/off" switch is positioned on the handle for accessibility.



                
B-100A
Click for larger picture                

B-100A- This lamp features 100 watts of high powered longwave light - excellent for UV inspection purposes. The lamp head, housed in scratch-resistant powder- painted aluminum, is connected to the transformer base by an 8 foot (2.44m) cord. UL listed.




B-100A/R

Click for larger picture
 
B-100A/R - (NSN 6635-00-511-5617): This lamp has the same features as the B-100A plus 20 foot (6.1m) primary lamp and secondary line cord which allow for additional mobility.  Two cord holders, extending 2..93 inches (74mm) on either side of ballast, keep slack cord under control.  UL listed.

 


 
Ordering Information:

Download the B-100 Manual

Model

Part Number

Volts

Bulb

Lamp
Watts

Intensity
2"/10"(uW/cm2)

Lamp Cord Length

Cool-
Touch Housing

Weight
Total/Head

Shipping Weight
Box Dimensions

Description

Price Dimensions

Primary
(Lamp)

Secondary
(Line)

B-100A

95-0044-22

115

SPOT

100W

21,700/8,900

8'
(2.44m)

8'
(2.44m)

NO 11.72lb (5.33kg)
2.38lbs (1.08kg)
16 lbs
22"x16"x10"

Hi-Intensity 100 Watt Longwave UV Lamp

$ 630.00

BALLAST: **
A, AP,YP
4.5" W  X 8.38H X 6.38"D
(114 X 213 X 162mm)

A/R
10.36"W X 8.38"H X 6.38"D
(263 X 213 X 162mm)


LAMP HEAD:
A. A/R, Y
8.5"D X 5.5" DIA
(216 X 140mm)



HANDLE:
A, A/R, Y
1.25"W X 5.5"H
(32 X 140mm)

A/P, SP, YP
1.5"W X 5.38"H
(38 X 137mm)

95-0044-02

200 - 260

B-100A/R

95-0044-03

115

SPOT

100W

21,700/8,900

20'
(6.1m)

20'
(6.1m)

NO 14.78lb (6.72kg)
2.38lbs (1.08kg)
16 lbs
22"x16"x10"

Hi-Intensity 100 Watt Longwave UV Lamp W/Cord Holder

$ 771.00

95-0044-04

200 - 260

B-100AP

95-0127-01

115

SPOT

100W

21,700/8,900

8'
(2.44m)

8'
(2.44m)

 

YES 12.48 (5.67kg)
3.14lbs (1.43kg)
16 lbs
22"x16"x10"

Hi-Intensity 100 Watt Longwave UV Lamp

$ 706.00

95-0127-02

200 - 260

B-100AP/R

95-0127-06

115

SPOT

100W

21,700/8,900

20'
(6.1m)

20'
(6.1m)

YES 15.54lb (7.06kg)
3.14lb (1.43kg)
16 lbs
22"x16"x10"

Hi-Intensity 100 Watt Longwave UV Lamp W/Cord Holder

$ 720.00

95-0127-07

200 - 260

B-100SP

95-0128-01

115
#

SELF-
BALLASTED

140W

11,600/5,000

8'
(2.44m)

N/A

YES 3.14lbs (1.43kg) 8 lbs
16"x12"x10"

Hi-Intensity 140 Watt Longwave UV Lamp
Self-Ballasted

$ 525.00

B-100Y

95-0044-24

115

SPOT

100W

*

 

8'
(2.44m)

8'
(2.44m)

NO 11.72lb (5.33kg)
2.38lbs (1.08kg)
16 lbs
22"x16"x10"

Hi-Intensity 100 Watt Longwave UV Wafer Inspection Lamp, Yellow

$ 628.00

95-0044-18

200 - 260

B-100YP

95-0127-03

115

SPOT

100W

*

8'
(2.44m)

8'
(2.44m)

YES 12.48lb
(5.67kg)
3.14lbs (1.43kg)
16 lbs
22"x16"x10"

Hi-Intensity 100 Watt Longwave UV  Wafer Inspection Lamp, Yellow

$ 706.00

95-0127-04

200 - 260

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

*    B-100Y and YP have a special filter that blocks out all UV light.
**  Ballast dimensions include the handle/lamp holder on top of the unit.
#    Not available in 200V -260V.  The manufacturer does not recommend the use
      of a converter with this lamp, and they do not guarantee the performance
      of the lamp with a converter and 230-240V power source.
Note:  Some 230V models are shipped with bare wire leads on the power cable.

Accessories

Part Number Description Price
89-0068-01 Finger Guard (AP) $ 61.00
19-0126-01 Lamp Funnel (A/P, AP/R, SP, YP) $  82.00
19-0124-01 Lamp Visor (A) $  82.00
19-0125-01 Lamp Visor (AP, AP/R, SP, YP) $  96.00
23-0052-01 Splash Guard (AP, AP/R, SP, YP) $  28.00
19-0158-01 Lamp Guard (A) $  45.00
76-0055-01 Exposure Box for B100AP, B100AP/R, B100SP, B100YP $202.00

 

Exposure Box for B100AP, B100AP/R, B100SP, B100YP
Specifications:
Material:
Finish:
Dimensions:
Shipping Weight:
16 Gauge cold rolled steel
Black powder coat paint
6 1/8" x 6 7/8" x 7 1/8"
Weight:  8 lbs

Replacement Parts / Bulbs

Part Number Description  Price
38-0009-01 Filter (all A & SP models) $  54.00
38-0009-02 Filter (all Y models) $   43.00
34-0049-01 Self Ballasted Bulb for B-100SP $ 191.00
34-0011-01 Spot Bulb (old B-100 pre 6/02) **
34-0054-01 Spot Bulb (new B-100 after 6/02) $   92.00
17-0057-01 Bulb Protector B-100SP $   25.00
88-0016-01 Ballast Kit B-100A/Y, AP/YP 110V $391.00
88-0016-02 Ballast Kit B-100A/Y, AP/YP 230V $391.00
23-0051-02 Bezel, Front B-100AP/YP $  24.00
10-0008-03 Lamp Housing A/Y $  63.00
10-0010-02 Socket Housing A/Y $ 20.00
14-0070-02 End Cap SP, AP, Y/P $ 31.00
17-0027-02 Filter Frame, Circular A/Y 43.00
19-0059-01 Socket Cover A/Y 17.00
22-0002-01 Lamp Handle A/Y $  24.00
22-0003-01 Ballast Handle A/Y 20.00
38-0168-01 Filter/Bezel Assy. B-100 AP $  85.00
38-0168-02 Filter/Bezel Assy. B-100 YP $  85.00
38-0168-03 Filter/Bezel Assy. B-100 A, AR $  85.00
38-0168-04 Filter/Bezel Assy. B-100Y $  85.00
36-0043-02 Socket, medium base $  25.00

 

** Direct replacement bulbs for lamps manufactured before 06/2002 are no longer available.  To convert the older lamps to use modern bulbs, the socket will have to be replaced (re-wired).  Order the following to convert your old B-100 Lamp to use the new bulbs.  A new bulb and socket are required.

34-0054-01 Spot Bulb (new B100 Lamps)    $92.00
36-0043-02 Socket, medium base  $25.00


 

 
 

WE SHIP WORLDWIDE !



 
 
Equipment Bargain Basement
We occasionally have used, demo units or open boxes available at great prices!
 
To place an ORDER, or for applications information, prices, tubes/bulbs, replacement/repair parts:  Click Here
Or, email request for information:
 

WARNING

Never look into a UV lamp while it is turned on, as UV sources can injure your eyes.  UV protective glasses should be used when using UV sources, which can cause burning to unprotected eyes and skin.  Do not allow children to use, or play with, any UV source.

 

 

         

UVP 2011 Last updated: 01-01-14. Specifications and prices subject to change without notice.

Copyright 1998-2017 by Mineralogical Research Co.
All rights reserved.